Trapezoid PCD coating removal tool for scraping coatings on concrete floors

Trapezoid PCD grinding discs are the most aggressive concrete floor grinding tools. Mainly used for removing thick epoxy coatings on the surface of concrete floors. Two 1/4 quarter round PCD and one rectangle wear bar on trapezoid is an excellent choice when removing heavy coatings. Clockwise and counterclockwise rotational direction are interchangeable.


  • Model No: ZL-PCD-11
  • Size: 2x1/4PCD
  • Material: PCD+ Diamond segment
  • Function: Coating removal
  • Usage: Wet and Dry
  • Connection: 3-M6 holes or 3-D9mm holes
  • Product Detail

    Product Tags

    Product Introduction

    Typical trapezoid shape matches with most floor grinders. 3-M6 threaded holes, 3-D9mm through holes, Diamatic/Blastrac 6 holes are all available.
    Two of 1/4 quarter round PCDs and a wear bar which is usually in 30grit.
    PCD can be 1/2 round as well and wear segment can be in the shape of rectangle, round, arrow etc.
    Mainly used for removing floor coatings like paint, glue, resin, epoxy etc. Especially good for removing thick/heavy epoxy coatings.
    Clockwise and counterclockwise rotational direction are interchangeable, fit all the major planetary floor grinders.
    Besides typical Trapezoid,HTC, Husqvarna, Lavina, Terrco, Werkmaster, Scanmaskin, Contec connections are all available.

    Product Advantages

    Z-LION Trapezoid PCD coating removal tools work excellent on removing all kinds of coatings on concrete surface and get the floor prepared for grinding. The special features of the tool are as follows:
    High quality diamond is used in the matrix of wear bar and high quality PCDs make the tool with good grinding capacity.
    PCDs and wear bar are professionally welded onto the trapezoid metal base, extend the lifetime of the tool.
    PCDs are slightly higher than the wear bar which acts as stabilizer and depth guide ensure the PCD to remove coatings effectively and efficiently without damaging the concrete.
    PCDs are direction-specific,operator need to check the direction of rotation of the grinder heads and mount left or right hand PCDs to match. We mark left or right hand direction on the tool or paint different color for left and right hand for operator to pick the correct tool quickly.

    Model No. ZL-PCD-11
    Size: 2x1/4PCD
    Material PCD + Diamond segment
    Function Coating removal
    Usage Wet and Dry
    Connection 3-M6 holes or 3-D9mm holes

     

    Product Applications

    It is widely used for floor surface preparation and restoration, such as warehouse, parking lot, workshop, supermarket etc. Remove coatings on the surface of concrete floor and get the floor prepared for grinding and polishing.

    QQ图片20210826141648
    PCD2
    PCD1
    Z-LION-PCD-Metal-Trapezoid-Grinding-Disc-2-Quarter-Round-PCD-With-Sacrificial-Diamond-Segment-Epoxy.jpg_Q90.jpg_.webp (2)
    Z-LION-PCD-Metal-Trapezoid-Grinding-Disc-2-Quarter-Round-PCD-With-Sacrificial-Diamond-Segment-Epoxy.jpg_Q90.jpg_.webp (4)
    Z-LION-PCD-Metal-Trapezoid-Grinding-Disc-2-Quarter-Round-PCD-With-Sacrificial-Diamond-Segment-Epoxy.jpg_Q90.jpg_.webp (3)
    Z-LION-PCD-Metal-Trapezoid-Grinding-Disc-2-Quarter-Round-PCD-With-Sacrificial-Diamond-Segment-Epoxy.jpg_Q90.jpg_.webp
    02(1)
    03(2)
    01(3)

  • Previous:
  • Next: